APPLICATION AND USE. Preparation. Use in accordance with the standard Global Yacht specifications. All surfaces to be coated should be. Interline Glass Flake Vinyl Ester. Consult your International Paint representative for the system best suited for the surfaces to be protected. International Interline is a two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance.
|Published (Last):||20 October 2011|
|PDF File Size:||11.24 Mb|
|ePub File Size:||19.35 Mb|
|Price:||Free* [*Free Regsitration Required]|
Keep fluid interlinf as short as possible and use Teflon Packings. Please ensure you refer to all datasheets for full application information. Consult your International Paint representative for the system best suited for the surfaces to be protected.
Frequency of cleaning will depend upon amount sprayed, temperature, relative humidity and elapsed time, including any delays. When used in non-marine applications, different overcoating intervals apply – refer to the International Protective Coatings Interline datasheet.
Application Guidelines – Marine – AkzoNobel
Test performance results were obtained in a controlled laboratory environment and International Paint makes inter,ine claim that the exhibited published test results, or any other tests, accurately represent results found in all field environments.
In the event welding or inrerline cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation. Proper ventilation and protective imterline must be provided during application and drying to keep solvent vapour concentrations within safe limits and to protect against toxic or oxygen deficient hazards. Multiple coats may be required to achieve specified film thickness.
These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method.
International Interline 955
Send us your question. VOC values are typical and are provided for guidance purposes only. Typical Coverage per coat. Remove filters from gun and pump. The recommended level of retarder solution is as follows: I would like to hear about offers and services: All surfaces to be coated should be clean, dry and free from contamination. Petersburg, Russia, phone: Use in accordance with the standard Worldwide Marine Specifications. If oxidation has occurred between blasting and application of Interlinethe surface should be reblasted to the specified visual standard.
Customer further agrees 95 we have no liability for any errors or omissions contained within the Product Data Sheets. A surface profile of microns is recommended. It is your responsibility to read the Product Data Sheets available below before you place an order and prior to application of the product. The question has been correctly sent.
Marine Coatings Marine chemicals Marine lubricants. The content of this website is our best recommendation and is not advice. International Interline Reference: Consult your local International Paint representative for specific recommendations. Once the unit has been mixed, it must be used within the working pot life specified. Overcoating information is given for guidance only and is subject ijterline regional variation depending upon local climate and environmental conditions.
Application by brush is recommended for small areas only. Technical and application data herein is for the purpose of establishing a general guideline of the coating application procedures.
High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning. Always mix a complete unit in the proportions supplied. Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product.
Where necessary, remove 9555 spatter and smooth weld seams and interlone edges. If you do not fully understand niterline warnings and instructions or if you can not strictly comply with them, do not use this product.
Low trade prices Our best trade prices on everything!
Products Marine Coatings Marine chemicals Marine lubricants. If oxidation has occurred between blasting and application of Interlinethe surface should be reblasted to the specified standard.
Do not exceed pot life limitations.
The recommended level of retarder is as follows: